Oregon General Contractor License: Requirements
Last verified: November 16, 2026
If you plan to offer or bid on contractor work in Oregon, you need a current license from the Construction Contractors Board (CCB). ORS 701.021 requires a current CCB license with an appropriate endorsement, unless an exemption in ORS 701.010 applies. This guide covers the requirements for an Oregon general contractor license, from training and the exam through the bond, insurance, fee, and renewal.
The steps below follow the CCB's published requirements. Confirm the figures on the CCB pages linked in each section before you file, since fees and rules can change.
Who Needs a CCB License
ORS 701.021 applies to anyone who offers to undertake or bids to do work as a contractor. The CCB lists the following work among those that require a CCB license:
- Roofing and siding
- Painting and carpentry
- Heating and air conditioning
- Electrical and plumbing
- Tree servicing
- Home inspection and handyman work
- Chimney inspection and sweeps
If your trade is not on this list, read the exemptions in ORS 701.010 or confirm your situation with the CCB before you bid. Unlicensed contracting is expensive. Under ORS 701.992, a person who violates ORS chapter 701 or a CCB rule may be assessed a civil penalty of not more than $5,000 for each offense.
Registering a business name is not the same as getting a license. The Oregon Secretary of State says licenses are issued at the state level by profession or industry, and by some cities and a few counties.
What You Need Before You Start
Gather these items before you begin. Each one is covered in the steps below.
- Proof that you are at least 18 years old
- A certificate for 16 hours of pre-license training from an approved provider, or your NASCLA exam result
- Your passing result on the Oregon exam
- A surety bond in the amount for your license type, written on the CCB bond form
- General liability insurance at the minimum for your license type
- Workers' compensation coverage if your business has employees
- The $400 initial application fee
- The name of your Responsible Managing Individual (RMI)
Step-by-Step: Earning Your Oregon General Contractor License
Step 1: Choose the License Type You Need
The CCB sorts licenses by type. Residential general, residential specialty, and residential limited contractors each carry different bond and insurance amounts. Commercial work is split into Level 1 and Level 2 categories for general and specialty contractors. Pick the type that matches the work you plan to bid, because the bond and insurance you buy depend on it.
Step 2: Confirm Your Eligibility and Name Your RMI
The applicant must be at least 18 years old. The application also names a Responsible Managing Individual, an owner or employee who manages or supervises construction activities. The person who passes the Oregon exam becomes the RMI, so decide who that will be before you schedule the exam.
Step 3: Complete the 16-Hour Pre-License Training
Complete at least 16 hours of pre-license training from a provider approved for CCB licensing. Ask the provider to confirm that it is on the CCB's approved list before you pay.
If you have passed the NASCLA Accredited Examination for Commercial General Building Contractors, you do not have to complete the 16 hours of training. You still must pass the Oregon exam, which covers laws, rules, and business practices.
Step 4: Pass the Oregon Exam
The Oregon exam has 80 multiple-choice questions. A passing score is 70%, which is 56 correct answers. The exam is open book, so you may use the reference manual. It costs $60, and you pay the exam provider directly.
Plan to apply for the license within 24 months of passing the exam. This guide does not cover what happens after that window, so confirm your options with the Construction Contractors Board.
Step 5: Secure Your Bond and Insurance
Get a surety bond and general liability insurance at the minimum amounts for your license type, listed in the table below. Bonds must stay continuous until canceled and must reach the CCB no later than 60 days from the date the bond company signed them. If your business has employees, you need workers' compensation insurance. Commercial contractors must carry it regardless.
| License type | Bond amount | Liability insurance minimum |
|---|---|---|
| Residential general contractor | $25,000 | $500,000 per occurrence |
| Residential specialty contractor | $20,000 | $300,000 per occurrence |
| Residential limited contractor | $15,000 | $100,000 per occurrence |
| Commercial General Contractor Level 1 | $80,000 | $2,000,000 aggregate |
| Commercial General Contractor Level 2 | $25,000 | $1,000,000 aggregate |
| Commercial Specialty Contractor Level 1 | $55,000 | $1,000,000 aggregate |
| Commercial Specialty Contractor Level 2 | $25,000 | $500,000 per occurrence |
Step 6: Apply and Pay the Initial Fee
Submit your application within 24 months of passing the exam, once your exam result, bond, and insurance are in place. The initial application fee is $400, effective July 1, 2025. Check the CCB License page for the current fee and submission method before you pay.
Step 7: Plan for Renewal and Continuing Education
License renewal is $400 every two years. Residential general and residential specialty licensees must complete continuing education in each renewal period:
- Three hours of CCB laws, regulations, and business practices
- Five hours of other approved courses if you have been licensed by the CCB for six or more years
- 13 hours of other approved courses if you have been licensed by the CCB for less than six years
Add your renewal date and education deadline to your calendar as soon as your license is issued.
Additional Licenses That May Apply to Your Work
Lead-Based Paint Renovator License
If you work on housing or child-occupied facilities built before 1978, you must hold a Lead-Based Paint Renovator license to bid or work. In Oregon, the renovator firm license must be associated with an existing CCB license. At least one owner or employee must complete the eight-hour Renovation, Repair and Painting (RRP) training. The initial certification is valid for five years and is followed by a four-hour refresher. The CCB lists the application fee as $50 and the renewal as $50 every year.
Electrical and Plumbing Work
Electrical and plumbing work still requires Building Codes Division licenses after you obtain your CCB license. Plan for those applications separately.
Landscape Work
Contractors licensed by either the Landscape Contractors Board (LCB) or the CCB may plan, install, maintain, or repair arbors, decks, patios, driveways, fences, retaining walls, walkways, landscape edging, or ornamental water features. If your work falls in that group, review the Landscape Contractors Board's license requirements.
Tips and Common Mistakes
Common Mistakes to Avoid
- Treating a business name registration as a license. It is not one.
- Letting your exam result go stale before you apply. Apply within 24 months of passing.
- Buying a bond that is not continuous or that will not reach the CCB on time. Bonds must reach the CCB no later than 60 days from the date the bond company signed them.
- Choosing a license type that does not match your bond and insurance. Each type has its own minimums.
- Overlooking lead-based paint rules for housing built before 1978.
- Assuming your CCB license is enough for electrical or plumbing work. You still need Building Codes Division licenses.
- Missing the continuing education requirement at renewal.
Practical Tips
- Choose your RMI early. The person who passes the exam becomes the RMI, so pick someone who will actually manage or supervise construction activities.
- Study the reference manual. The exam is open book, but you still need to reach the 70% passing score.
- Ask your bond company how it will meet the 60-day filing window before you sign.
- Keep copies of your training certificate, exam result, bond, and insurance certificate until your application is submitted.
What Results to Expect
Completing these steps should leave you with a CCB license, which ORS 701.021 requires before you offer or bid on covered contractor work. The license also sets your renewal cycle, with continuing education and a renewal fee every two years.
Your results depend on the license type you choose and the work you bid. This guide cannot predict CCB processing decisions or timing, so confirm those details with the CCB.
Frequently Asked Questions
Do I need a CCB license to work as a general contractor in Oregon?
ORS 701.021 requires a current CCB license with an appropriate endorsement for anyone who offers or bids to do contractor work, unless an exemption in ORS 701.010 applies. Read the exemptions or confirm your situation with the Construction Contractors Board before you bid.
Can a NASCLA exam result replace the Oregon exam?
A NASCLA Accredited Examination result for commercial general building contractors lets you skip the 16 hours of pre-license training. You must still pass the Oregon exam, which covers laws, rules, and business practices.
How long do I have to apply after passing the exam?
You must apply within 24 months of passing the Oregon exam. This guide does not cover what happens after that window, so confirm your next steps with the Construction Contractors Board.
Disclaimer
This article is general information about Oregon contractor licensing. It is not legal or tax advice. Requirements, fees, and rules can change, so verify current details with the Construction Contractors Board. For advice about your situation, consult an attorney or CPA.