Contractor reviewing blueprints at a jobsite, Oregon HVAC License

Oregon HVAC License: What the State Requires

Last verified: November 16, 2026

If you plan to install, repair or replace heating and air conditioning systems in Oregon, you need to know which license applies before you bid a job. For most HVAC contractors, the answer is a Construction Contractors Board (CCB) license. Heating and air conditioning are on the CCB's list of licensed work, and Oregon law requires a current CCB license and an appropriate endorsement for anyone who offers or bids to do that work, unless an exemption applies.

This guide covers the steps to get an Oregon HVAC license through the CCB, the costs and insurance involved, and where the Building Codes Division (BCD) fits in. It also explains the optional limited maintenance license for HVAC/R work and the federal refrigerant certification. Where this guide does not cover a detail, it tells you which agency to confirm with.

What You Need Before You Apply

Gather these items before you start the process. Most apply to the CCB application, and the rest apply if you hire staff or add maintenance work to your business.

  • A person to serve as the Responsible Managing Individual (RMI), the owner or employee who passes the exam and manages or supervises construction activities
  • Proof that you meet the minimum age of 18
  • A record of at least 16 hours of pre-license training from an approved provider
  • The $400 initial application fee, which applies to initial applications beginning July 1, 2025
  • The $60 exam fee, which you pay directly to the exam provider
  • A bond on the CCB bond form, sized to your license classification
  • Liability insurance that meets the CCB minimum for your classification
  • Workers compensation insurance if your business has employees
  • A registered business name, if you operate under one. Registering a name is separate from getting a license.

Step-by-Step: Getting Your Oregon HVAC License

The steps below follow the order most applicants use. Some can run at the same time, such as lining up insurance while you study for the exam.

Step 1: Confirm Which License Your Work Requires

Start by matching your work to the right license. Heating and air conditioning fall under the CCB. Under ORS 701.021, you need a current CCB license and an appropriate endorsement to offer or bid this work, unless an exemption in ORS 701.010 applies. The CCB also lists electrical and plumbing work as licensed work, so a job that crosses trades may require more than one license.

This guide does not cover whether a separate state technician license exists for HVAC work. Confirm that question with the CCB and BCD before you hire or advertise your services. The CCB License page is the best starting point.

Step 2: Meet the CCB Eligibility Requirements

You must be at least 18 years old to apply. You also need at least 16 hours of pre-license training from an approved provider and a passing score on the Oregon exam. The person who passes becomes your RMI. That person must be an owner or an employee who manages or supervises construction activities, so choose the RMI early in the process.

This guide does not list pre-license training prices or schedules, because they vary by provider. Ask each approved provider for current pricing and class dates before you enroll.

Step 3: Prepare for and Pass the CCB Exam

The Oregon exam has 80 multiple choice questions. A passing score is 70 percent, which is 56 correct answers. The exam is open book, so you may use the reference manual during the test. The exam costs $60, and you pay it directly to the exam provider.

Open book does not mean easy. Tabbed reference material only helps if you know where to look. Practice locating answers in the manual, and study the sections that cover your licensed trade rather than relying on the manual alone.

Step 4: Submit the Application and Pay the Fee

Complete the CCB initial license application and pay the $400 application fee. The fee applies to initial applications beginning July 1, 2025. Renewal is $400 every two years, so include that cost in your budget from the start.

Check the CCB License page for the current application steps and any forms you must submit with it. Keep copies of everything you send, along with proof of payment and the date you sent it.

Step 5: Set Up Your Bond, Insurance and Workers Compensation

The CCB requires a bond and liability insurance based on your license classification. The minimums for residential classifications appear in the table below, as listed on the CCB License page.

Residential ClassificationBond AmountLiability Insurance per Occurrence
General contractor$25,000$500,000
Specialty contractor$20,000$300,000
Limited contractor$15,000$100,000

Workers compensation insurance is required if your business has employees. The CCB also requires it of commercial contractors. Confirm which classification fits your HVAC business before you buy coverage, because the bond and insurance minimums differ. This guide does not list commercial bond or insurance amounts, so confirm those with the CCB.

Step 6: Decide Whether the LHR License Fits Your Work

Oregon offers an optional Limited Maintenance Specialty Contractor HVAC/R (LHR) license. It is issued under OAR 918-282-0040 and covers maintenance and replacement of listed electric heating, cooling and refrigeration equipment. It is a BCD license, and it does not replace your CCB license. To hold it, you need:

  • An active CCB license
  • A registered business name
  • A full-time signing supervisor

The LHR license has no exam and no continuing education requirement. The fee is $25 a year, or $75 for 3 years.

The BCD scope table describes what a minor label under this license allows. A minor label permits repair or replacement of a furnace (oil or gas) not exceeding 20 amps and 150 volts to ground, single-phase, along with a fan, an electrical furnace, an air conditioning unit or a refrigeration unit, within the same voltage limit. The same table says an individual installer license is not required for that listed furnace, fan and air conditioner work within 150 volts to ground, single-phase, provided a list of employees is on record with BCD.

If you hire, a Limited Maintenance Specialty Contractor HVAC/R must create and maintain an electrical training record within 60 days of hiring for each employee who will do electrical work.

Step 7: Track Renewals and Continuing Education

Renewal rules depend on your license type. For CCB residential specialty and general licenses, continuing education is 3 hours of CCB laws, regulations and business practices plus 5 hours of other approved courses if you have been licensed by the CCB six or more years. If you have been licensed less than six years, you complete 13 hours of other approved courses. Check the CCB Continuing Education page for the current rules that match your classification.

BCD licenses can be renewed online within 45 days of the expiration date. Many BCD licenses require you to register continuing education before you renew. A license that has been expired more than one year requires retesting, so put the expiration date on your calendar well in advance.

Refrigerant Handling Requires a Federal Certification

If your work involves handling refrigerants, you need EPA Section 608 technician certification. This is a federal credential under the U.S. Environmental Protection Agency (EPA) rules in 40 CFR Part 82, Subpart F, and it is not an Oregon license. The technician certification requirement appears at 40 CFR 82.161.

Common Mistakes to Avoid

  • Assuming one license covers every trade: The CCB lists heating, air conditioning, electrical and plumbing as separate licensed work. Confirm the scope of each job before you bid it.
  • Taking on thermostat wiring without checking scope: Thermostat wiring of 100 volt-amperes or less outside one- and two-family dwellings requires employing a journeyman or supervising electrician, or a Class A or B Limited Energy Technician. Check with BCD on control wiring scope before you accept that work.
  • Treating the LHR license as a full HVAC license: The LHR license covers the listed maintenance and replacement work in its scope table. It does not cover all HVAC contracting.
  • Naming a part-time signing supervisor: The LHR license requires a full-time signing supervisor, so a part-time arrangement does not meet that requirement.
  • Missing the electrical training record deadline: A Limited Maintenance Specialty Contractor HVAC/R must create the record within 60 days of hiring each employee who will do electrical work.
  • Letting a renewal lapse: A BCD license expired more than one year requires retesting. Calendar your renewal dates and any continuing education you must register first.
  • Confusing a business name with a license: The Oregon Secretary of State says registering a business name with the Corporation Division is not the same as getting a license.
  • Handling refrigerant without EPA certification: Refrigerant work requires the federal EPA Section 608 credential, even though it is not an Oregon license.

What to Expect After You Get Licensed

Once the CCB issues your license, you can bid on and perform the licensed HVAC work covered by your classification. A current license may also help you show customers that the required bond and insurance are in place. Results depend on your market, your services and how you run the business.

Penalties apply if you break the rules. Under ORS 701.992, a person who violates ORS chapter 701 or a CCB rule may be assessed a civil penalty of not more than $5,000 for each offense. Keep your license current, and confirm the details of any new type of work with the CCB before you take it on.

Frequently Asked Questions

Do I need a CCB license for HVAC work in Oregon?

Yes, heating and air conditioning are on the CCB's list of work that requires a license. Under ORS 701.021, you need a current CCB license and an appropriate endorsement to offer or bid the work, unless an exemption in ORS 701.010 applies. Confirm whether an exemption fits your situation with the CCB.

Is the LHR license a required hvac license in Oregon?

The LHR license is optional. It covers maintenance and replacement of listed electric heating, cooling and refrigeration equipment. To hold it, you need an active CCB license, a registered business name and a full-time signing supervisor.

Do I need an EPA certification to handle refrigerant?

If your work involves handling refrigerants, you need EPA Section 608 technician certification. It is a federal credential, not an Oregon license.

How much does an Oregon HVAC license cost?

The CCB initial application fee is $400, and the exam costs $60, paid to the exam provider. CCB renewal is $400 every two years. Pre-license training prices vary by provider, so ask each approved provider for current pricing. The optional LHR license is $25 a year, or $75 for 3 years.

Disclaimer

This guide is informational content only. It is not legal or tax advice. Licensing rules, fees and insurance minimums can change, so confirm current requirements with the Construction Contractors Board, the Building Codes Division or the agency named in each section. For advice about your own situation, consult an attorney or CPA.

Sources

Keep exploring: related Oregon guides